Maintenance notes of bottling machines
Maintenance notes of bottling machines :
1, because the bottling machine is an automated machine, so easy to pull the bottle, bottle pad, cap size are required to unity.
2, turn on the machine before you must turn the handle with the shake machine, to see whether its rotation, went really can identify normal and then turn on the machine.
3, adjusting the machine, the tool to use appropriate, non-used large tools or excessive force to dismantle parts due to mechanical damage or affect machine performance.
4, adjusted whenever the bottling machine, be sure to tighten loose screws had good look with the shake machine handle rotation to meet the requirements of its action, the party can drive.
5, the machine must be kept clean, the machine is strictly prohibited on oil, liquid or glass debris to avoid bottling machine wear and tear, so be aware of the following:
⑴ machine in the production process, timely and clear liquid or glass debris.
⑵ shift before the machine surface of the ministries should be cleansed once, and in all sectors of activity with clean oil.
⑶ should be cleaned once a week, in particular, will usually not easy to use place to wipe or clean with compressed air blowing.
6 hours of continuous operation 10 hours a day or less, to ensure clean water and cooling pumps to work, the spindle motor will not make the water appear water shortages, regular replacement of the cooling water to prevent the water temperature is too high. If the ambient temperature is too low in winter can be put inside the water tank into antifreeze.