Model No:
JND-WY-1280
Home > Product > Bottle blow molding machines > PET Bottle blowing machines > Cap Injection Moulding Machine JND-WY-1280
Cap Injection Moulding Machine JND-WY-1280
| Injection Unit | UNIT | A | B | C |
| Screw Diameter | mm | 38 | 42 | 45 |
| Shot Volume (Theoretical) | cm3 | 204 | 249 | 286 |
| Injection Weight | g | 186 | 227 | 261 |
| Injection Rate | g/s | 107 | 117 | 122 |
| Plasticizing Capacity | g/s | 14.9 | 17.1 | 18.6 |
| Injection Pressure | Mpa | 203 | 174 | 152 |
| Screw Speed | rpm | 0-220 | ||
| Clamping Unit | UNIT | |||
| Clamp Force | KN | 1280 | ||
| Open Stroke | mm | 360 | ||
| Space Between tie Bars | mm | 420*380 | ||
| Max. Mould Height | mm | 420 | ||
| Min. Mould Height | mm | 150 | ||
| Ejector Stroke | mm | 115 | ||
| Ejector Force | KN | 38 | ||
| Others | UNIT | |||
| Max. Pump Pressure | Mpa | 16 | ||
| Motor Power | KW | 13 | ||
| Heating Power | KW | 6.9 | ||
| Machine Dimension (L*W*H) | m | 4.4*1.36*1.95 | ||
| Machine Weight | t | 4.4 | ||
Product Category
- Contact us
- tel.(086) 755 83432619
- zhoujin0425
- @ HOTMAIL