Model No:
JND-CPJ-SS2600
Home > Product > Bottle blow molding machines > PET Bottle blowing machines > Automatic Bottle Blowing Machine JND-CPJ-SS2600
Automatic Bottle Blowing Machine JND-CPJ-SS2600
JND-CPJ-SS2600 is one of the fastest liner blow molding machines in mainland of China by now. Thanks to our experienced research team, JND-CPJ-S2500 reaches around 2500BPH for 350ML bottle. It has independent baking tunnel and the blow station so that time for mold opening is shortened with a result of speedy blowing and high output; damage to machine is lessened so as to enjoy reliable performance and long service life, as well as, machine runs more smoothly and steadily.
| Description | Type | Unit | Capacity | |||
| 1 | Automatic blowing machine (2-cavity) | JND-CPD\J-SS2600 | 1set | |||
| 2 | Air compressor | 30Bar | 3sets | 1.2M3/30bar | ||
| 3 | Air compressor | 10Bar | 1set | |||
| 4 | Air filter | 4sets | ||||
| 5 | Air dryer for HP | 30Bar | 1set | 1.0 M3/30bar | ||
| Air dryer for LP | 10Bar | 1set | ||||
| Air tank | 30Bar | 1set | 30bar | |||
| 6 | ||||||
| 7 | Industrial chiller | Fan type | 1set | |||
| 8 | Bottle mould | 2-cavity | 1set | 2500b/hr |
| Technical specification of MG-SS2600 Automatic Stretch Blow Molding Machine | ||||||
| Volume of product | 0.1-2.5L | |||||
| Product raw material | PET | |||||
| Mould plate maximum dimension | 420*500mm | |||||
| Mould opening stroke | 0.1-2L:150mm 6L(1caivty):250mm | |||||
| Max mould thickness | 0.1-2L:150mm 5L(1caivty):250mm | |||||
| Clamping force | 380KN | |||||
| Air pressure for working | 0.8-1.25Mpa | |||||
| Air pressure for blowing | 1.5-4.0Mpa | |||||
| Temperature control | 7 section | |||||
| Length of pre-form | 50-220mm | |||||
| Inner diameter of pre-form tube | 15-126mm | |||||
| Stretching bar diameter | 8-50mm | |||||
| Quantity of heating rotation | 34-60pcs | |||||
| Length of bottle | 340mm | |||||
| Diameter of bottle | 60-220mm | |||||
| Power | 23KW | |||||
| Temperature in the pre-form | 3.5KW | |||||
| weight | 2600kgs | |||||
| Main machine dimensions | 316×225×226cm | |||||
| (L×W×H) | ||||||
| Weight of conveyer | 400KGS | |||||
| Conveyer dimensions | 200×190×226cm | |||||
| Electric voltage/Frequency | 220V/380/50Hz | |||||
| Pneumatic parts for JND-CPJ-SS2600 machine | ||||||
| NO | ITEM | IMPORTED FORM | ||||
| 1 | Main cylinder for Clamping | FESTO/Germany | ||||
| 2 | Stretching Cylinder | FESTO/Germany | ||||
| 3 | Solenoid valve for High pressure 2pcs | FESTO/Germany | ||||
| 4 | Solenoid valve for Low pressure 2pcs | FESTO/Germany | ||||
| 5 | PLC Controller | Taiwan/Detal | ||||
| 6 | Water divide | SMC/JAPAN | ||||
| 7 | Oil divide | SMC/JAPAN | ||||
| 8 | Lubrication | Automatic | ||||
| 9 | Temperature controller | It is special design form China famous company | ||||
| 10 | Blow pipe | China it can bear 80kgs, actually we only use 30kgs. | ||||
| Electrical power loading: | ||||||
| MG-SS2600 Automatic bottle blowing machine: 28KW | ||||||
| High pressure air compressor 2sets 30KW | ||||||
| Low pressure air compressor 1set 15KW | ||||||
| Total power load is 73KW |
||||||
Product Category
- Contact us
- tel.(086) 755 83432619
- zhoujin0425
- @ HOTMAIL